When a burner refuses to light or refuses to shut off, you need a person who knows cooktops, not a general handyman. Our dispatchers connect callers around Gresham Park with independent stove specialists, any hour of the day.
Stove problems look simple from the kitchen and often are not. That is why we route your call to independent pros who spend their days on burners, igniters, switches and glass tops.
Every contractor we connect you with runs their own licensed, insured business. Gas work on a range touches a supply line, so ask the pro about their gas certification for your area before work starts.
You see the number before a screwdriver turns. The pro gives you a written, upfront quote after the diagnosis, and the choice to proceed is yours.
We work the local schedule while you are still on the phone. Same-day visits happen often when a nearby pro has an open slot, and the dispatcher pins down a time window before you go.
Expect a manometer, a digital multimeter, an orifice set, and tech sheets for slide-in, freestanding and pro-style ranges. The right tools mean the first visit is usually the one that gets the burner going again.
Freestanding ranges, slide-in ranges, drop-in cooktops, induction surfaces and the heavy pro-style rangetops with open burners all come through our line. The problem is almost always on top: a burner, an igniter, a switch, a control board or the glass itself.
Tell the dispatcher the brand, whether it runs on natural gas, propane or electricity, and exactly which burner misbehaves. That short description helps the pro bring the right igniter, element or valve on the first trip.
These are the cooktop faults that fill our phone log. If yours is not listed, call anyway; the dispatcher will match you with a pro who knows that model.
Constant clicking with the knob turned off often means a spill soaked the switch harness under the knobs. No spark at all on every burner points the pro toward the spark module or its power feed.
A healthy flame is crisp and blue. Yellow tips, lazy flames or flames that lift off the ports point to clogged burner ports, a misaligned burner cap, a dirty orifice or a regulator problem. The pro clears the ports, reseats the cap and head, and checks pressure with a manometer.
When a coil burner stays cold, the culprit is usually the element, the receptacle block it plugs into, or the infinite switch behind the knob. A scorched or melted receptacle has to be replaced along with its wiring terminals, or the new coil will fail too.
Glass ceramic cooktops hide radiant elements and a limiter under the surface. A zone that stays dark, a hot-surface light that never goes out, or a cracked or crazed top all need a pro, and a cracked top should not be used until it is replaced.
Blinking codes, a zone that will not detect the pan, or a cooktop that shuts down mid-boil are classic induction calls. The technician checks the cooling fan, generator board and coil connections with the service manual open.
Stripped knobs, stiff valve stems and gas valves that leak by are common on busy kitchens. The pros also convert cooktops between natural gas and LP orifices and install the anti-tip bracket that keeps a freestanding range from tipping onto a child.
Bring these notes to the phone call. The pro confirms the cause with real tests before quoting a part.
| Symptom | Common cause | What the tech checks |
|---|---|---|
| Clicking that will not stop | Wet or shorted valve switch, cracked igniter | Switch continuity, harness, igniter gap |
| No spark on any burner | Spark module or power supply | Module output and incoming voltage |
| Yellow or lifting flame | Clogged ports, wrong orifice, pressure off | Ports, cap seating, manometer reading |
| Coil only heats on high | Failed infinite switch | Switch cycling with a multimeter |
| Smooth-top zone stays cold | Radiant element or limiter open | Element and limiter resistance |
| Induction error code | Cookware, fan or power board | Code lookup, fan, board voltages |
No forms, no waiting for an email. Here is what happens after you dial our dispatch line.
One phone call starts everything. Tell us what the cooktop is doing, and we look for a nearby pro with time on the schedule.
A local pro heads your way with cooktop parts on board. The dispatcher tells you the arrival window before you hang up.
After testing, you get a plain explanation and a written quote from the technician. You decide whether the fix makes sense for your range.
Once the part is in, the technician lights or powers every burner, checks flame or heat on each setting, and leak-tests any gas fitting that was opened.
The technicians we route you to work from the tech sheet tucked inside most ranges. They test first, then quote. If a part is not on the truck, they tell you how long the order takes and book the return trip.
Our dispatch line is answered day and night.
Our front left burner clicked for two days straight, even with the knob off. The tech found that a pot of pasta water had boiled over into the switch harness. He dried it, replaced one valve switch, and the clicking stopped. The quote was written out before he started.
I own a couple of older rentals and one tenant reported a burner that smelled hot. The technician found a melted receptacle block on the coil range, replaced it with new terminals and a new coil, and showed me the scorched wiring. Glad we caught it.
My induction cooktop kept flashing an error and shutting off in the middle of cooking. The tech checked my pans with a magnet first, which was fair, then found the cooling fan was jammed with grease. Cleaned and replaced the fan, and it has run fine since.
Our range needed an LP conversion after the move. The technician changed the orifices and regulator setting, then mounted the anti-tip bracket. The flames are blue and steady now.
The spark module fires whenever a switch tells it to. A spill, a cracked igniter or a failed switch behind the knob can keep that signal on, which is why the clicking never stops. A pro can test each switch and replace the bad one.
It is worth treating as a warning. Healthy burners show a firm blue flame. Yellow tips point to a dirty burner, a misaligned cap, or gas pressure that is off, and the technician can confirm it with a manometer.
Shut off power at the breaker for an electric range, or close the gas shutoff valve behind a gas range, then call us. A burner stuck on usually means a welded infinite switch, a stuck relay, or a valve that will not seat.
Cracked glass ceramic cannot be patched safely. The fix is a replacement top, and the pro checks the radiant elements and limiter while it is off. Avoid using the cooktop until then.
Most gas ranges and cooktops can be converted with an LP kit from the manufacturer. The pro swaps the burner orifices, adjusts the pressure regulator, and checks every flame afterward.
Induction only works with magnetic cookware. If a magnet does not stick firmly to the bottom of the pan, the zone will not heat. If your pans pass the magnet test, the technician looks at the coil, sensor and power board next.
Our referral line covers homes, condos, apartments and rental properties in Gresham Park and the nearby neighborhoods and suburbs. The independent pros we connect you with drive to you, and most carry common igniters, coil elements and switches on the truck.
Landlords and property managers use the line too, since a dead burner in a rental becomes an urgent tenant call fast. Tell the dispatcher who will be home to let the technician in.
Gas, electric or induction: call and we will find a pro near you.
